 |
See How It's Done |
|
This is a brief outline of how a repair is done, using an automobile leather
repair as an example.
All materials used in this example are included with each kit. |
|
|
Step
1
Prepare the
surface to be repaired by cleaning it with soap and water, or Lexol pH Cleaner. |
Step 2
Wipe the repair area with
an alcohol pad.
 |
|
|
Step 3
If you have a deep hole in
your leather or vinyl, you will need to apply a sub-patch first, otherwise you
will proceed to step 4. |
Step 4
Spread a thin
layer of Magic Mender over the repair area
smoothing it out as much as possible.
Allow to completely dry.
 |
|
|
Step 5
Lightly wipe over
the repair with another alcohol pad
to smooth out any uneven spots.
|
Step 6
Spray or brush the
repaired area with Color-Flex finish.
Allow to completely dry.
Finish by applying conditioner (optional).
NOTE: We no longer sell the sprayer shown in this photo.
We sell the "Fine Mist Sprayer" instead. It's non-aerosol.
 |
|
|
Now wasn't that easy? We told you it
was! |
 |
|
 |
|
Before |
After |
|
| |
See our
testimonials page for more examples.
Below are a couple.
Click on the photo's to see a closer
view.
|
 |
|
 |
| Before |
After |
Before |
After |
|
| |
