Clear Coat is a specially formulated, water based clear finish that dries quickly and feels like the original surface. It’s used to change the sheen of our Color Flex which has a “satin” finish.  You can also use Clear Coat as a protectant if you want added durability without adding more color to the surface.  Available in Matte, Low Luster, Satin and  High Gloss.

1 – Clear Coat – Bottle contains (5 oz /150 ml  or 10 oz /300 ml)
1 – Foam sponge applicator
1 – Disposable paint tray

Coverage:

Estimating coverage can be tricky.  Much depends on the condition of the surface the Color Flex is being applied to and the color itself.  For most small projects our 5.1 bottle is more than sufficient.   A good comparison that most people would be familiar with: A typical 12 oz aerosol can holds approximately 3.4 oz of color, the rest is solvent and propellant.

Lighter colors (colors that contain white) will cover better than colors that contain more transparent tints like red.  Shades of red typically require more applications.  We double the tint base to combat that but please be aware that shades of red may not cover as well as the stated areas below.

One 5.1 oz bottle of Color Flex 
Same color or similar – 1 coat covers approximately 14 sq ft – or two front seats of a car or one large arm chair
Change color –  2 coats covers approximately 7 sq ft

Shelf Life:

Store in a cool, dark place with the lid tightly fastened.  Make sure that the edge of the container is clean and free of any debris. Stored properly, Clear Coat should last for at least a year (possibly longer) without degrading.